Monthly Archives:: June 2019

NORTH DAKOTA IN-CROP DICAMBA USE EXTENDED UNTIL JULY 10

June 26, 2019
BISMARCK – The North Dakota Department of Agriculture (NDDA) announced today it will extend the application date for the in-crop use of Dicamba on soybeans for the 2019 growing season. The new deadline is July 10 or beginning bloom (R1 growth phase), whichever comes first. In January, NDDA had approved a 24c Special Local Needs (SLN) label for the in-crop use of Dicamba on soybeans only until June 30.
“Due to persistent rain events, lack of suitable days for spraying and the delayed growth of soybeans, the last date for applications has been extended to July 10,” Agriculture Commissioner Doug Goehring said. “The beginning bloom (R1 growth phase) restriction is still applicable and product may not be applied if soybeans have reached this phase.”
All provisions of the federal label still apply.

Dicamba Cutoff Date Approaching

Dicamba cutoff dates are approaching for both North and South Dakota. See details below from each department of Agriculture.


SOUTH DAKOTA DEPARTMENT OF AGRICULTURE NEWS RELEASE

For Immediate Release: June 17, 2019
Media Contact: Maggie Stensaas, 605.773.4073

Dicamba Cutoff Date Approaching

PIERRE, S.D. – The South Dakota Department of Agriculture (SDDA) reminds applicators that June 30 is the cutoff date for dicamba products.

The SDDA obtained Special Local Needs registration labels, also known as 24(c) labels, from the U.S. Environmental Protection Agency (EPA) for the following products: Engenia, Fexapan and Xtendimax with VaporGrip Technology. These labels establish a June 30 cutoff for applications of these products in South Dakota for the 2019 growing season. Applicators can use these products until soybeans reach the R1 growth stage, 45 days after planting or June 30, whichever comes first.

“While the weather has had an impact on planting this year, which I know is frustrating for many producers, the fact remains that warmer conditions in July increase the risk of volatility and drift when using dicamba products. The cutoff date is based on data which supports increased risk of drift after July 1,” says Secretary of Agriculture Kim Vanneman. “I encourage producers to explore the other products available to them once the cutoff date for use of dicamba has passed.”

Anyone applying Engenia, Fexapan or Xtendimax with VaporGrip Technology must also abide by the restrictions included in the EPA labels for those products, including recordkeeping requirements. Additionally, applicators applying or purchasing these products will have to complete annual dicamba specific training. Trainings can be found on the SDDA website at https://sdda.sd.gov/ag-services/dicamba/.

Agriculture is a major contributor to South Dakota’s economy, generating $25.6 billion in annual economic activity and employing over 115,000 South Dakotans. The South Dakota Department of Agriculture’s mission is to promote, protect and preserve South Dakota agriculture for today and tomorrow. Visit them online at sdda.sd.gov or find them on Facebook, Instagram and Twitter.


IN-CROP DICAMBA USE SUBJECT TO NORTH DAKOTA-SPECIFIC REQUIREMENTS

May 2, 2019

BISMARCK – Agriculture Commissioner Doug Goehring is reminding producers that the North Dakota Department of Agriculture (NDDA) has developed a 24c Special Local Needs (SLN) label for the in-crop use of Dicamba on soybeans. The federal label would only allow for in-crop applications no more than 45 days after planting or prior to beginning bloom (R1 growth phase), whichever comes first. The North Dakota 24c SLN allows applications of Dicamba on soybeans through June 30 or beginning bloom (R1 growth phase), whichever comes first.

In October 2018, the Environmental Protection Agency (EPA) announced it has extended the registration of Dicamba for two years for over-the-top use in Dicamba-tolerant soybeans, while also making new changes to the label.

The other label changes made by the EPA for the Dicamba formulations of XtendiMax, Engenia, and FeXapan are as follows:

  • Two-year registration (until Dec. 20, 2020)
  • Only certified applicators may apply Dicamba over the top (those working under the supervision of a certified applicator may no longer make applications)
  • Applications will only be allowed from 1 hour after sunrise to 2 hours before sunset
  • In counties where endangered species may exist, the downwind buffer will remain at 110 feet and there will be a new 57-foot buffer around the other sides of the field (the 110-foot downwind buffer applies to all applications, not just in counties where endangered species may exist)
  • Clarifies training period for 2019 and beyond, ensuring consistency across all three products
  • Enhanced tank clean out instructions for the entire system
  • Enhanced label to improve applicator awareness on the impact of low pH’s on the potential volatility of Dicamba
  • Label clean up and consistency to improve compliance and enforceability

“As a best management practice, farmers should strongly consider good weed management strategies such as pre-plant and pre-emerge products,” Goehring said. “Farmers should not rely solely on post-emergence applications of Dicamba or any herbicide for weed control.”

The new protocols will only affect applications made on soybeans for XtendiMax, Engenia, and FeXapan. The restrictions will not affect generic Dicamba on other crops.

Ready for Change

By Annette Bertelsen, from Spring 2019 C magazine

What happens when the world’s biggest buyer suddenly backs away from U.S. soybeans? That’s been a question on everyone’s mind since July 6, 2018, when the United States implemented China-specific tariffs. The move embroiled U.S. farmers and cooperatives in a trade war that hit the soybean world particularly hard. Spring USDA data shows 2018–2019 soybean export inspections down nearly 34 percent from the year before, with farms and cooperatives struggling to handle huge carryover and reduced cash flow.

(more…)

Local high school seniors awarded CHS Northern Plains scholarships

Five high school seniors from the CHS Northern Plains trade area have been named recipients of $1000 scholarships.
 
“CHS Northern Plains is committed to strengthening our future leaders and ensuring a strong future for our youth,” said Todd Oster, general manager. “Since the scholarship program started, it’s been an honor and a privilege to make an impact in the endeavors of our youth right here in our local communities. Congratulations to this year’s recipients.”
 
 
The recipients of the 2019 CHS Northern Plains scholarships include:

Cole Baumiller, Hazelton, ND, son of Scott & Corrine Baumiller
Tanner Kempf, Ashley, ND, son of John & Michelle Kempf
Alex Vander Vorste, Pollock, SD, son of Loren & Andrea Vander Vorste
Autumn Wieseler, Gettysburg, SD, daughter of Ben Wieseler and Deb and Justin Cronin
Lauren Wittler, Onida, SD, daughter of Matt & Sherise Wittler
 
In order to be eligible for a CHS Northern Plains scholarship, applicants must be a high school senior from the CHS Northern Plains trade area. A parent or guardian must be a customer of CHS Northern Plains. We encourage but do not require the individual to be seeking a degree or certification in agricultural studies.  Full details can be found on our website, chsnorthernplains.com.
 
The local CHS Northern Plains retail businesses deliver agronomy, energy, feed and grain products and services to North and South Dakota ag producers and other customers from eight locations, as part of CHS Inc., a leading global agribusiness owned by farmers, ranchers and cooperatives across the United States. Diversified in energy, agronomy, grains and foods, CHS is committed to helping its customers, farmer-owners and other stakeholders grow their businesses through its domestic and global operations. CHS supplies energy, crop nutrients, grain marketing services, animal feed, food and food ingredients along with financial and risk management services. The company operates petroleum refineries/pipelines and manufactures, markets and distributes Cenex® brand refined fuels, lubricants, propane and renewable energy products.

© 2019 CHS Inc.